Built-in
Water Tank
Energy-Saving Chiller
Digi-Eco Chiller
※1 Operation when chilled water temp. is 20℃ and cooling water temp. is 32℃ Cooling capacity is at least 95% of listed figures.
※2 Source voltage phase unbalance should be less than ±3%
※3 The figure noted is when the equipment is operating at the highest capacity of its normal operating range.
※4 Stable load indicates continued operation with maximum load fluctuations of ± 10% of the current load.
※5 The capacity figures listed represent just one point on this model’s flow-rate/head characteristic curve. Pumps differ between models; for model specific details, please refer to the pump characteristic curves.
※6 Operating noise levels are from a position of 1m in front of the unit and at a height of 1m
※7 Unit comes with a built-in multi-purpose overload and short circuit protection breaker.
Note 1: The chilled fluid can be either potable water or a low concentration ethylene glycerol water solution of 10% or less.
Note 2: Please install the included strainer (40 mesh) to the fluid intake port.
Note 3: Heat output of the equipment (in kW) is about 1.3 times the cooling capacity. (air cooled models only)